|Measurements:||69 x 32 x 21 cm|
|Carrying system 1:||X Vent Zero-System|
|Fabric 1:||T-DIA Rip|
|Fabric 2:||Texamid 1.0|
|Fabric bottom:||420 HD Nylon|
Lightweight, abrasion-resistant ripstop fabric with woven diamond pattern. Stronger polyethylene warp and weft threads make this backpack fabric extremely tear and cut resistant.
93% Polyamide, 7% Polyethylene
Lightweight materials need thin fibres. Strong fabrics need high-strength fibres. So it makes sense to use 100 den Nylon fibre. Thanks to the PU-silicone coating, the tear resistance is increased by a further approx. 20%.
420 HD Nylon
The classic 420 den Nylon material has proved itself in the "high density" (HD) version as a good, very flexible basic material. The 420 den yarn gives it a very high tear resistance. The material is made waterproof by the triple PU coating.
The X Vent Zero system offers maximum control and the best possible ventilation with minimal contact with the back. Two x-shaped fibreglass rods (1) on the back of the packsack combine with waist straps (2) to make the supporting connection of the packsack. The tightening and releasing of the system is infinitely variable, which means it can be adjusted individually. If the system is loosened completely, then the backpack can also be positioned to fit close to the back. Thanks to the consistent reduction in the use of materials, this system makes every rucksack a lightweight.