The material that outdoor dreams are made of: Hightech-Material
TATONKA products fulfil the highest standards // This has to do with the fact that they are made from innovative materials, which are perfectly aimed at their particular area of use and combine seemingly incompatible properties. The highest level of water resistance with absolute breathability, maximum durability with the minimum weight. Whichever functions the hightech materials of the TATONKA products have to fulfil, they do it one hundred percent.
200 den Polyester PU
Lightweight, strong Oxford fabric in 200 den polyester yarn with triple PU coating.
210T Nylon Ripstop
A very lightweight outer fabric with a fine Ripstop texture and pleasantly soft to the touch. PU-coated on the inside, it has a water column of 2 000 mm.
420 HD Nylon
The classic 420 den Nylon material has proved itself in the "high density" (HD) version as a good, very flexible basic material. The 420 den yarn gives it a very high tear resistance. The material is made waterproof by the triple PU coating.
450 HD Polyoxford
Soft, PU coated polyester fabric made of 450 denier yarn in Oxford look.
Acetal is a crystalline thermoplastic polymer material. Acetal characteristically has excellent tensile strength, stiffness, surface hardness and chemical resistance. Acetal has excellent flexural memory and property retention when subjected to repeated loading. The normal short-term use temperature range is -40°F to +270°F (-40°C to +132°C). Acetal is recommended for high performance applications and Tatonka uses this material for buckles on backpacks. Physical properties remain consistent across a wide range of temperature, relative humidity, and weather conditions.
150 den Polyester Mesh
Polyester mesh material which is used for storage bags as well as for integrated mesh pockets in many pockets and travel items.
CORDURA® 500 den
We are using the classic CORDURA® fabrics made in high tenacity, air-jet textured nylon 6.6 in 500 Denier. CORDURA® brand provides fabrics that are recognized for their long-lasting durability and resistance to abrasions, tears and scuffs and is more durable than other fabrics. No matter the application, CORDURA® fabric offers a superior strength-to-weight ratio, making it a first-choice for durable fabrics.
CORDURA® 700 den
CORDURA® in fibre thickness 700 den combines the high wear and tear resistance of the classic 1000 den fabric with the lightness of the 500 den fabric.
Screening products with the specially developed tear-resistant material CRYPTALLOY® offer the highest level of protection against RFID/NFC attacks. The TÜV certified material blocks radio waves on all the usual RFID frequencies and can be used for all cards.
Laminated Square Mesh
(Outer layer: 100% Polyester Inner layer: 100% Polyurethane)
The polyester mesh is laminated with a soft, transparent polyurethane foil that makes it waterproof. It is used for the Dodgers.
(Outer layer: 100% Polyamide Inner layer: 100% Chloroprene)
Impact and waterproof stretch laminate material with excellent heat insulating properties. Used by Tatonka for small flexible items and laptop bags.
The woven rib webbing is extremely wear- and tear-proof, and is used for packing straps, belts and rucksack straps.
(74% Polypropylene, 21% Elastane, 5% Polyester)
Elastic woven webbing.
(50% Polyester, 50% Poly chloride)
Robust tarpaulin material made of 1000 denier fabric with smooth surface, which is mainly used for bags. The polyester fabric is coated on both sides, absolutely waterproof and easy to clean.
Rugg Tex is an extremely resistand, visually attractive polyamide fabric, which has outstanding mechnic properties. The material has a high wear and tear resistance and its PU coating also make it water-repellent. At Tatonka Rugg Tex has many different uses, e.g. for travel backpacks and bags.
The textured polyester material in 600 den threads is robust, colourfast and versatile. PU-coated to achieve a weatherproof finish.
It is a soft plastic, and is used as a transparent foil for the Zip Flight Bag.
The high-tear and abrasion-resistant RipStop fabric shows a lively surface due to the irregularly interwoven thicker threads. The material is waterproof by PU coating and is used for backpacks.
The PU-coated polyester fabric has a striking pattern and gives pockets and small backpacks a contrasting, elegant look.
Lightweight, abrasion resistant polyamide fabric with fine patterning that resembles parent snow crystals. Thanks PU coating on the inside of the material is waterproof. T-Snow Crust is used in backpacks and bags.
Thanks to the fine structure, this development by Tatonka is extremely technical. The very tight, special weaving method of the 210 den fibres makes the fabric extremely strong, but it remains light at the same time. Perfect for our lightweight trekking and hiking rucksacks.
T-Square Rip Light
The fine Ripstop structure and triple PU/silicone coating make this lightweight fabric extremely resistant to tearing. It is used primarily for small and medium-sized backpacks.
This finely woven, very light fabric is made from 210 den threads. The Ripstop structure makes it extremely strong, and the PU coating on both sides makes it waterproof. We use the material for travel bags and backpacks.
This very light, waterproof material made out of polyester is pleasantly soft to the touch, and is used mainly for capes, rain covers and stuff bags.
The fibre is made of cellulose, so can absorb lots of water and dried very quickly. Tatonka uses this material for travel towels.
30 den Nylon Ripstop 245T WR
With a lightweight, air-permeable, water-repellent finish, the 30 den Nylon Ripstop material is the perfect inner tent material for the Expert series.
75 den Polyester 185T PU
The outer tent material has four layers of PU coating on the inside (water column 8 000 mm). It is proven to be UV resistant and colourfast. Because the fabric does not absorb water, it will not stretch when damp or wet.
70 den Nylon Ripstop 190T WR
The water-repellent (W/R) fabric in 70 den Nylon is particularly air-permeable. The stronger threads running horizontally and vertically (Ripstop) increase the fabric's tear resistance, which makes it ideal for inner tents.
70 den Nylon Taffeta 190T PU
This is a tightly and finely woven material for very light tent floor. Quadruple PU-coated, with a 10 000 mm water column rating.
65/35 Polycotton PU
(65% Polyester, 35% Cotton)
As an additional protection against wetness, the 65/35 Polycotton material is double coated with PU on the inside. With a water column < 1 300 mm, this material may not be DIN waterproof. When wet, the cotton actually swells up and closes up the weave, making it waterproof. At Tatonka the fabric is used for tarps.
Bug Beater Mesh
This supple, extemely fine gauze with over 1000 holes/inch² is used for the entrances to our tents, mosquito tents and head protectors.
30 den Nylon 6.6 Ripstop250T Si
A highly tear-proof, lightweight tent fabric from our Expert series. The material's excellent properties are due to the very high quality of the basic material (6.6 Ripstop Nylon), which is reinforced with several layers of a silicone coating (3 on the outside, 2 on the inside). Which makes it almost impossible to tear this wafer-thin material with your bare hands! 100% water-repellent, as both sides are silicone-coated; 1 500 mm water column.
The thermoplastic polymer is soft, malleable, and safe for food use. Tatonka uses it to make the folding canister.
Guy ropes are made from these durable, wear- and tear-proof plastic fibres.
Aluminium tent frame in 7001/6061 alloy is used in different thicknesses to provide the optimum tension of the frame arch in large family tents. For straight vertical use, tubes of 15 mm diameter provide excellent stability; tubes of 13 mm diameter are used on bends and corners.
The aluminum alloy 7075 in hardness T6 is a very light and break-resistant material and is therefore used for highly stressed products, e.g. our 3-part pole telescope.
The anodised tent frames in the 7001 aluminium alloy in hardness T6 combine high breakage resistance (brittleness) with optimum rigidity (dimensional stability).
Aluminium coated PE-foil
(100% Polyethylene Coating: 100% Aluminium)
A thin, soft, waterproof polyethylene foil is coated in aluminium. Used on the emergency blanket, it reflects the body’s own warmth.
(Outer layer: 100% Aluminium Inner layer: 100% Polyethylene)
With PE-foam covered aluminium foil.
The polyethylene foil is reinforced with textile fibres, and is used to manufacture the basic protective sack (Schutzsack einfach) for backpacks.
The robust wood of coconut trees is very light and of high strength. Therefore, it is perfect for spoons and cooking utensils.
(100% Stainless steel 18/8)
Pots, pans and all other tableware made out of 18/8 stainless will happily accommodate most requests in an outdoor kitchen. 18/8 stainless steel is durable, food safe and easy to clean.
Comfortable and lightweight polyester fleece with a mottled surface and knitted optic. Thanks to Polygiene® the garment keeps fresh and odor free.
This cosy densely woven, bicoloured material is a very soft polyester fleece with an excellent insulation.
T-Casual Shell Kingston
(Outer layer: 36% Polyester, 35% Acrylic, 21% Wool, 6% Polyamide, 2% Cotton Inner layer: 100% Polyester)
Classic (tweed) in combination with modern materials (foam bonding), given a sporty interpretation. This lightweight material is in a coarsely woven tweed look on the outside with a smooth inside in fine, plain-coloured polyester jersey.
(Outer layer: 100% Polyester Membrane: 100% Polyurethane)
This lightweight, very soft double-layer material has phenomenal values for waterproofness and breathability. The outer material is woven from a fine twill bond.
(Outer layer: 100% Polyester Membrane: 100% Polyurethane)
This waterproof and breathable material with a herringbone optic is used by Tatonka for fashionable all-weather jackets and coats.
(Shellfabric: 100% Polyamide Wadding: 100% Polyester (3M™ Thinsulate™ Insulation))
Very light and fluffy 3M™ Thinsulate™ Insulation wadding with a high thermal output. The outer material is a hard-wearing polyamide. The material is used for jackets, gilets, inner jackets and coats.
(91% Polyamide, 9% Elastane)
The elastic double weave material has a robust outer side and a brushed inner side. It is used by Tatonka for lighter SoftShell coats, jackets and trousers.
(93% Polyamide, 7% Elastane)
This lightweight, very quick drying and comfortable fabric is equipped with a UV-protection of +30. At Tatonka it is used for functional travel trousers and shorts.
(94% Polyamide, 6% Elastane)
Very light, elastic and quick-drying material. The functional material makes the garment comfortable to wear and is used for travel and hiking clothing.
T-Tech Weave NC
(85% Polyamide, 15% Elastane)
The lightweight, elastic and quick-drying shirt material has a sun protection of +30 and, thanks to the Polygiene® finish, absorbs hardly any body odor.
T-Tech Weave TS
(50% Lyocell (Tencel), 30% Cotton, 20% Polyester)
Leightweigth shirt material made of Tencel® Sun. The Lyocell fiber is made of natural growing cellulosic fiber and due to an integrated mineral pigment, it provides a long-term light sun protection. The material has a cotton feel and the special fibril structure of the fiber helps create an optimal skin climate and reduces bacteria growth.
T-Tecno Stretch 3
(64% Polyester, 30% Polyamide, 6% Elastane)
Bi-elastic stretch fleece with a smooth, low pilling surface. The material provides rapid moisture transport and dries very quickly.
T-Travel Cotton Heavy
(61% Cotton, 39% Polyamide)
The densely woven, firm cotton blend is used for jackets, coats and trekking trousers. The fabric is treated with a wax based on paraffin and thus PFC-free.
(Outer layer: 92% Polyamide, 8% Elastane Inner layer: 100% Polyamide Membrane: 100% Polyurethane)
This robust, elastic, wind- and waterproof 3-layered material is used by Tatonka for high-quality hardshell jackets. This ultrathin nonporous membrane is extremely waterproof and offers a high air permeability and stretchability.
T-Wool Fleece Melange
(40% Wool, 40% Polyester, 18% Polyamide, 2% Other fibres)
Thanks to the high proportion of wool this mottled, leightweight, knitted material has a very good heat management. The smooth inner side makes the garment comfortable to wear.
T-Casual Shell Twill
(Outer layer: 47% Polyester, 28% Cotton, 18% Wool, 7% Polyamide Inner layer: 100% Polyester Membrane: 100% Polyurethane)
The 3 layer material provided with the windproof NoWind® membrane unifies classic jeans look, the inside is made of fine, solid-color polyester fleece.
External Aluminum Frame