The Tatonka Document Belt can be worn directly against the skin, as the back is made of pleasantly soft material. The waist belt is also very flat.

The Document Belt has a PFC/PFAS-free DWR finish.

Also available in size L.

The money and document belt Skin Moneybelt Int. is designed to be worn concealed: The back is made of soft material and the flat waist belt has a quick-release fastener.

The money belt has a PFC/PFAS-free finish.

Flat and inconspicuous to wear under clothing, the bum bag is a safe place to store your passport, driver’s license, credit cards and money.

The Tatonka Skin Moneybelt has two zippered compartments and an adjustable waist strap with quick-release fastener. It has a PFC/PFAS-free finish.

In the inconspicuous leg bag Tatonka Skin Secret Pocket you not only store money, but also documents theft-proof.

The document bag is attached to the calf or thigh with two straps and disappears under the clothing. The soft material on the back makes it easy to wear directly on the skin.

The Skin Secret Pocket measures 19 x 19 cm and has two zip pockets.

It has a PFC/PFAS-free finish.

The Tatonka Flip In Pocket is fastened to the belt and carried inside, so it holds money, ID and credit cards theft-proof. The wallet has a zipper pocket and measures 12.5 x 19 x 1 cm.

The purse is provided with a dark and a light belt loop, into which the belt is threaded according to the color. Then you simply fold the Flip In Pocket into the inside of the pants.

The Flip In Pocket has a PFC/PFAS-free finish.

The travel belt Tatonka Travel Waistbelt has a zip pocket on the inside, in which banknotes can be stowed theft-proof. So you can be sure, even in the most crowded of places, that no one will simply pull your money out of your pocket.

The belt is 3 cm wide, the length can be adjusted individually.

The Folder protects against data theft: The wallet is equipped with an integrated RFID readout protection. In the Folder RFID Block, credit cards and ID cards find a safe place because the integrated CRYPTALLOY® foil blocks the radio waves and prevents data theft using RFID reading devices.

The folder offers three compartments for bank and credit cards, a small coin pocket with zipper, a clear compartment, e.g. for your ID card, and a banknote compartment with an additional zipper pocket.

It is made from partly recycled material and has a PFC/PFAS-free DWR finish.

Get more information about RFID and all Tatonka RFID / NFC blocking products here.

Additional information:

With the CRYPTALLOY® foil Tatonka uses a film that offers maximum shielding against relevant frequencies (from 100 kHz to 4 GHz; this means low, high and ultrahigh frequency range) and due to a frequency shift disturbs any radio communication. This was tested and approved by the TÜV Saarland.

As the manufacturer ‘Kryptronic Technologies’ has confirmed the required processing of the foil in all of Tatonka’s RIFD products. Click here to get to the Folder RFID B certificate

The Big Plain Wallet RFID Block measures 13 x 9 x 2 cm and has three credit card-sized insert compartments and two zippered pockets. The all-round zipper allows the wallet to be pulled wide open.

The integrated protective foil prevents the data theft of data stored on RFID chips.

The wallet is made from partly recycled material with a PFC/PFAS-free DWR finish.

Additional information

Tatonka uses CRYPTALLOY® foil in all of its RFID protection products. This provides maximum shielding on all relevant RFID frequency ranges (from 100 kHz to 4 GHz, i.e. low-, high- and ultrahigh-frequency ranges). The protective foil also interferes with “radio traffic” by shifting frequencies. CRYPTALLOY® foil functionality has been tested and approved by TÜV Saarland. The manufacturer of the foil, Kryptronic Technologies Munich, has confirmed and certified Tatonka’s method of integrating the foil in its RFID block products.

RFID technology is on the rise: electronically stored data on RFID chips, which are built into credit cards, smartphones or ID cards, for example, can be read quickly and contactlessly using near-field technology. But this also arouses criminal energies, which is why documents and devices equipped in this way should be protected.

The Check In RFID Block blocks the radio waves thanks to the integrated CRYPTALLOY® film – making data theft impossible. The Check In RFID Block can be worn over the shoulder or carried on the belt. It has a large main compartment with a zipper and additional zippered compartments on and under the lid.

The bag is made from partially recycled material and has a PFC/PFAS-free DWR finish.

Additional information:

Tatonka uses a CRYPTALLOY® film in all its RFID block products. This offers maximum shielding in all relevant RFID frequency ranges (from 100 kHz to 4 GHz, i.e. low frequency range, high frequency range and ultra-high frequency range). The protective film also interferes with radio traffic by shifting the frequency. The functionality of the CRYPTALLOY® film has been tested and verified by TÜV Saarland.

The manufacturer of the film, Kryptronic Technologies Munich, has now confirmed and certified Tatonka’s prescribed processing of the film in all RFID block products.

Keep travel documents, passports, smartphones and Touch Pad safe in the Check In XL RFID Block. This user-friendly shoulder bag has a main compartment, zip pockets on and under the lid, and a practical organiser with pockets for credit cards. The integrated CRYPTALLOY® foil blocks radio waves, thereby preventing the stored data on electronic devices from being read out unintentionally.

The shoulder bag is made from partly recycled material with PFC/PFAS-free DWR finish.

Get more information about RFID and all Tatonka RFID / NFC blocking products here.

Additional information:

With the CRYPTALLOY® foil Tatonka uses a film that offers maximum shielding against relevant frequencies (from 100 kHz to 4 GHz; this means low, high and ultrahigh frequency range) and due to a frequency shift disturbs any radio communication. This was tested and approved by the TÜV Saarland.

As the manufacturer ‘Kryptronic Technologies’ has confirmed the required processing of the foil in all of Tatonka’s RIFD products.