EDC Pack 30 BC Bushcraft backpack

Backpack for bushcraft: Tatonka EDC Pack 30 BC

The robust daypack EDC Pack 30 BC from Tatonka has been specially developed for bushcraft fans. For attaching patches, there is a 10 x 5 cm hook-and-loop surface on the front of the backpack. It is suitable for forest and wilderness tours as well as for everyday use (EDC stands for Everyday Carry).

The daypack has a volume of 30 liters, is made of extremely durable Cordura and has an adjustable carrying system so that you can adjust it to your back length. The highlight of this backpack, however, is that it can be customized both inside and out.

Hook-and-loop areas in the main compartment for attaching accessory pouches

The main compartment of the EDC Pack 30 BC can be pulled open completely, making it easy to load. There are hook-and-loop areas on the back and sides to which you can easily attach small pouches with hook backing. This means your backpack is always clearly organized inside. We have developed the EDC Organisation Set (item no. 2015) with four pockets and two hook-and-loop compression straps to fit the backpack perfectly.

MOLLE-compatible modular fastening system on the front and sides

Thanks to the modular attachment system, you can equip the EDC Pack 30 BC with additional puches on the front and sides. You can use the Universal Pouches from Tatonka (item no. 3032, 3033, 3034, 3035) or pouches from other manufacturers with MOLLE system (MOLLE stands for Modular Lightweight Load Carrying Equipment). And of course you can also attach other equipment.

The hip belt of the backpack is equipped with a zippered pocket on one side and material loops on the other. You can detach it and use it separately as a belt for your equipment if you don’t want to take as much with you.

The backpack has a PFC/PFAS-free DWR finish.

It is one of Tatonka’s All Day Tough products for which we offer an extended product warranty of ten years.

• Vent Comfort Vario carrying system
• Load control straps for non-positive carrying
• Height-adjustable chest belt
• Special construction whereby hipbelt-fixation is re-directed to allow for single-handed adjustment
• Detachable, padded hip belt with MOLLE-compatible gear loops and zippered pocket
• Handle
• Mesh pocket inside the lid
• Mesh zipper pocket, elastic material loops and slip pockets in lid compartment.
• Side pockets made of an elastic material
• Flat front pocket with zipper
• Gear loops on the front
• Large insert pocket with side zip on front
• hook-and-loop area (10 x 5 cm) on the front for attaching patches
• Preparation for the attachment of the Notebook Sleeve (item 2016)
• Gear loops on the lid
• PFC/PFAS-free DWR finish
• Modular mounting system on the front
• Laser-cut MOLLE on the side
• Large hook-and-loop and MOLLE hook-and-loop areas inside

• 

  Cordura ® 500 den Eco

  Composition 100% polyamide

  The classic Cordura® material is made from high-strength, air-textured nylon 6.6 in 500 denier thread count and, like all Cordura® brand fabrics, is characterized by lasting stability and high abrasion and tear resistance. The material is PFC/PFAS-free.

• 

  420 HD Nylon FD Eco

  Composition 100% Polyamide

  The classic 420 den nylon material proves itself in the “High Density” (HD) version as a good base material, which can be used flexibly. The 420 den thread results in a high tear strength, at the same time this FD yarn (Full-Dull) gives the material a matt surface. The triple PU coating makes it waterproof. The material has a PFC/PFAS-free finish.

• EXPedition GmbH, DE-86453 DasingAGB
• OutdoorTrends, DE-87616 Marktoberdorf im AllgäuAGB
• Backpacker Stores, DE-69115 HeidelbergAGB
• Trekking König GmbH, DE-21337 LüneburgAGB
• Scandinavian Outdoor GmbH, CH-8184 BachenbülachAGB
• Globetrotter Ausrüstungen Denart und Lechhart GmbH, DE-22145 HamburgAGB
• Unterwegs Outdoorshop GmbH, DE-26386 WilhelmshavenAGB
• Bergfreunde GmbH, DE-72138 KirchentellinsfurtAGB